2 open source boards using the SN74LVC2G08DCTR
Real designs built with the SN74LVC2G08DCTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Esp32Tap - ESP32-S3 Precor serial bus tap
scottmsilver
95 × 58 mm76 parts4LNo license2
ESP32Controller core reva
itorralbo
141.6 × 135.2 mm187 parts4LMIT0
The SN74LVC2G08DCTR in open source designs
The gallery holds 2 open source boards using the SN74LVC2G08DCTR from 2 GitHub repositories; a typical one measures about 118.3 × 96.6 mm and carries around 132 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Esp32Tap - ESP32-S3 Precor serial bus tap by scottmsilver.
Parts used alongside the SN74LVC2G08DCTR
Microcontrollers on boards using the SN74LVC2G08DCTR
SN74LVC2G08DCTR: common questions
Where can I find a SN74LVC2G08DCTR reference design?
Each of the 2 boards on this page is a real design using the SN74LVC2G08DCTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC2G08DCTR use?
Most are built on ESP32 (2).
How big is a typical board using the SN74LVC2G08DCTR?
The median is 118.3 × 96.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC2G08DCTR?
By GitHub stars, Esp32Tap - ESP32-S3 Precor serial bus tap by scottmsilver, with 2 stars.
Can I simulate one of these boards using the SN74LVC2G08DCTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.