1 open source board using the STM32F411CEU1_PINS
Real designs built with the STM32F411CEU1_PINS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
I-M-Robotics-LabThe STM32F411CEU1_PINS in open source designs
The gallery holds 1 open source boards using the STM32F411CEU1_PINS from 1 GitHub repository; a typical one measures about 70 × 70 mm and carries around 43 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is STM32-Quadcopter by I-M-Robotics-Lab.
Microcontrollers on boards using the STM32F411CEU1_PINS
What boards using the STM32F411CEU1_PINS are built for
STM32F411CEU1_PINS: common questions
Where can I find a STM32F411CEU1_PINS reference design?
Each of the 1 boards on this page is a real design using the STM32F411CEU1_PINS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F411CEU1_PINS use?
Most are built on STM32 (1).
How big is a typical board using the STM32F411CEU1_PINS?
The median is 70 × 70 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32F411CEU1_PINS?
By GitHub stars, STM32-Quadcopter by I-M-Robotics-Lab, with 66 stars.
Can I simulate one of these boards using the STM32F411CEU1_PINS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.