2 open source boards using the TAR5SB33
Real designs built with the TAR5SB33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Vert Board rev3
tokoro10g
36 × 52.5 mm115 parts4LCustom license7
PICHL2-Companion board codec and-Filter-
bnamnaidu
100 × 100 mm192 parts2LNo license4
The TAR5SB33 in open source designs
The gallery holds 2 open source boards using the TAR5SB33 from 2 GitHub repositories; a typical one measures about 68 × 76.3 mm and carries around 154 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Vert Board rev3 by tokoro10g.
TAR5SB33: common questions
Where can I find a TAR5SB33 reference design?
Each of the 2 boards on this page is a real design using the TAR5SB33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TAR5SB33 use?
Most are built on PIC (1) and STM32 (1).
How big is a typical board using the TAR5SB33?
The median is 68 × 76.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the TAR5SB33?
By GitHub stars, Vert Board rev3 by tokoro10g, with 7 stars.
Can I simulate one of these boards using the TAR5SB33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.