3 open source boards using the Teensy3.6
Real designs built with the Teensy3.6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPPolaron
zueblin
157.5 × 116 mm71 parts2LNo license224
NXPFour Channel MHz LED Driver
Llamero
100 × 100 mm93 parts2LNo license6
NXPDD Compute 1
Acmex2564
200 × 65 mm167 parts2LNo license19
The Teensy3.6 in open source designs
The gallery holds 3 open source boards using the Teensy3.6 from 3 GitHub repositories; a typical one measures about 157.5 × 100 mm and carries around 93 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Polaron by zueblin.
Microcontrollers on boards using the Teensy3.6
What boards using the Teensy3.6 are built for
Teensy3.6: common questions
Where can I find a Teensy3.6 reference design?
Each of the 3 boards on this page is a real design using the Teensy3.6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Teensy3.6 use?
Most are built on NXP (3).
How big is a typical board using the Teensy3.6?
The median is 157.5 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the Teensy3.6?
By GitHub stars, Polaron by zueblin, with 224 stars.
Can I simulate one of these boards using the Teensy3.6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.