3 open source boards using the TPS54308
Real designs built with the TPS54308, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Remram
hasenbanck
140 × 104 mm259 parts4LNo license40
AVR/ArduinoTitan67j60
Lehman3065
191 × 123 mm242 parts2LNo license0
STM32Benchy2 Motherboard
Daxxn
159.5 × 105 mm951 parts8LAGPL-3.02
The TPS54308 in open source designs
The gallery holds 3 open source boards using the TPS54308 from 3 GitHub repositories; a typical one measures about 159.5 × 105 mm and carries around 259 components.
67% use four copper layers or more, and 33% carry an open source license.
The most starred is Remram by hasenbanck.
Microcontrollers on boards using the TPS54308
What boards using the TPS54308 are built for
TPS54308: common questions
Where can I find a TPS54308 reference design?
Each of the 3 boards on this page is a real design using the TPS54308. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS54308 use?
Most are built on STM32 (2) and AVR/Arduino (1).
How big is a typical board using the TPS54308?
The median is 159.5 × 105 mm, and 33% are two-layer designs.
What is the most popular open source board using the TPS54308?
By GitHub stars, Remram by hasenbanck, with 40 stars.
Can I simulate one of these boards using the TPS54308 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.