2 open source boards using the TPS56339DDCR
Real designs built with the TPS56339DDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 87 partsESP32
Antenny
RedBalloonShenanigans
87 partsNo license164 
STM32UPS-2 PowerSupply HW
ECOM-Engineering
65 × 56.5 mm59 parts2LCustom license2
The TPS56339DDCR in open source designs
The gallery holds 2 open source boards using the TPS56339DDCR from 2 GitHub repositories; a typical one measures about 65 × 56.5 mm and carries around 73 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Antenny by RedBalloonShenanigans.
What boards using the TPS56339DDCR are built for
TPS56339DDCR: common questions
Where can I find a TPS56339DDCR reference design?
Each of the 2 boards on this page is a real design using the TPS56339DDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS56339DDCR use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the TPS56339DDCR?
The median is 65 × 56.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the TPS56339DDCR?
By GitHub stars, Antenny by RedBalloonShenanigans, with 164 stars.
Can I simulate one of these boards using the TPS56339DDCR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.