2 open source boards using the TPS7A1650DGNR

Real designs built with the TPS7A1650DGNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The TPS7A1650DGNR in open source designs

The gallery holds 2 open source boards using the TPS7A1650DGNR from 1 GitHub repository; a typical one measures about 70 × 90 mm and carries around 42 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Sensored BLDC Controller by rjwalters.

Microcontrollers on boards using the TPS7A1650DGNR

AVR/Arduino 2

What boards using the TPS7A1650DGNR are built for

Robotics & motion 2

TPS7A1650DGNR: common questions

Where can I find a TPS7A1650DGNR reference design?

Each of the 2 boards on this page is a real design using the TPS7A1650DGNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS7A1650DGNR use?

Most are built on AVR/Arduino (2).

How big is a typical board using the TPS7A1650DGNR?

The median is 70 × 90 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS7A1650DGNR?

By GitHub stars, Sensored BLDC Controller by rjwalters, with 63 stars.

Can I simulate one of these boards using the TPS7A1650DGNR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.