5 open source boards using the TPS7A4001DGNR

Real designs built with the TPS7A4001DGNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filtersOpen license only|Most starred Recently updated Most components

The TPS7A4001DGNR in open source designs

The gallery holds 5 open source boards using the TPS7A4001DGNR from 5 GitHub repositories; a typical one measures about 60 × 60 mm and carries around 135 components.

80% use four copper layers or more, and 20% carry an open source license.

The most starred is Pandore by filliformes.

Parts used alongside the TPS7A4001DGNR

Microcontrollers on boards using the TPS7A4001DGNR

What boards using the TPS7A4001DGNR are built for

TPS7A4001DGNR: common questions

Where can I find a TPS7A4001DGNR reference design?

Each of the 5 boards on this page is a real design using the TPS7A4001DGNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPS7A4001DGNR?

The ISO7141CCDBQR, TL431BQDBZR, TPS26613DDFR, AD7124-8BCPZ and ADR4525BRZ appear in the most repositories here.

Which microcontrollers do boards using the TPS7A4001DGNR use?

Most are built on AVR/Arduino (1) and RP2040/RP2350 (1).

How big is a typical board using the TPS7A4001DGNR?

The median is 60 × 60 mm, and 20% are two-layer designs.

What is the most popular open source board using the TPS7A4001DGNR?

By GitHub stars, Pandore by filliformes, with 2 stars.

Can I simulate one of these boards using the TPS7A4001DGNR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

5 open source boards using the TPS7A4001DGNR

Pandore

EBM7-2608-V23-MOSFET

EBM7-2608-V3

EMB2-2609-V5

5S-Blower-Controller