15 open source boards using the SPX3819M5-L-3-3/TR
Real designs built with the SPX3819M5-L-3-3/TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
V4.0
tomojitakasu
70 × 92.8 mm238 parts4LBSD-3-Clause526V3.0
osqzss
72 × 26 mm158 parts4LBSD-3-Clause18- schematic only · 56 partsESP32
KiCad-PCB-design workshop
LEDs-by-glowingkitty
56 partsGPL-3.09 ESP32
GlowBand
LEDs-by-glowingkitty
27.9 × 34.3 mm76 parts2LMIT4STM32
LQRx-InterleavedBuck
Natchpai
100 × 67 mm244 parts4LCERN-OHL-S-2.02RP2040/RP2350
RefleXion X65
TweetyDaBird
133.4 × 117.1 mm168 parts2LNo license0EBM7-2608-V23-MOSFET
2solve
60 × 60 mm155 parts4LNo license0ESP32
ConeRGB2
ConnorRigby
78.5 × 95 mm152 parts4LApache-2.00EBM7-2608-V3
2solve
60 × 60 mm135 parts4LNo license0ESP32
Lite wing drone
Omern187
100 × 100 mm76 parts2LNo license0Microchip SAM
Tempo bt
rrainey
58.4 × 54 mm59 parts4LGPL-3.00Usb2uart hardware
samvangysegem
41.2 × 32.6 mm42 parts4LNo license0V4.1
tomojitakasu
70 × 92.8 mm221 parts4LBSD-3-Clause526Microchip SAM
Tempo
rrainey
58.4 × 54 mm55 parts2LGPL-3.00V3.0
tomojitakasu
72 × 26 mm158 parts4LBSD-3-Clause526
How designs wire the SPX3819M5-L-3-3/TR
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the SPX3819M5-L-3-3/TR connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 5V on 11 of 11 designs.
- The OUT pin is tied to 3.3V on 11 of 11 designs.
- The BP_4 pin has a capacitor to GND on 6 of 11 designs, most often 100 nF (then 470 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 100% | — |
| GNDpin 2 | Connected to: GND 91% | — |
| BP_4pin 4 | Connected to: Signal 73% · not connected 27% |
|
| OUTpin 5 | Connected to: 3.3V 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include V3.0 by tomojitakasu, V3.0 by osqzss, GlowBand PCB by LEDs-by-glowingkitty and LQRx-InterleavedBuck by Natchpai.
The SPX3819M5-L-3-3/TR in open source designs
The gallery holds 15 open source boards using the SPX3819M5-L-3-3/TR from 12 GitHub repositories; a typical one measures about 70 × 60 mm and carries around 152 components.
71% use four copper layers or more, and 67% carry an open source license.
The most starred is V4.0 by tomojitakasu.
Parts used alongside the SPX3819M5-L-3-3/TR
Microcontrollers on boards using the SPX3819M5-L-3-3/TR
What boards using the SPX3819M5-L-3-3/TR are built for
SPX3819M5-L-3-3/TR: common questions
Where can I find a SPX3819M5-L-3-3/TR reference design?
Each of the 15 boards on this page is a real design using the SPX3819M5-L-3-3/TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SPX3819M5-L-3-3/TR IN pin connected?
The IN pin is tied to 5V on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the SPX3819M5-L-3-3/TR.
How is the SPX3819M5-L-3-3/TR OUT pin connected?
The OUT pin is tied to 3.3V on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the SPX3819M5-L-3-3/TR.
How is the SPX3819M5-L-3-3/TR BP_4 pin connected?
The BP_4 pin has a capacitor to GND on 6 of 11 designs, most often 100 nF (then 470 pF). Counted from the KiCad layouts of 11 open source designs using the SPX3819M5-L-3-3/TR.
What parts are used alongside the SPX3819M5-L-3-3/TR?
The 74AVC9112DCH, AD7124-8BCPZ, ADR4525BRZ, AO3400A and AP40P05 appear in the most repositories here.
Which microcontrollers do boards using the SPX3819M5-L-3-3/TR use?
Most are built on ESP32 (4), Microchip SAM (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the SPX3819M5-L-3-3/TR?
The median is 70 × 60 mm, and 29% are two-layer designs.
What is the most popular open source board using the SPX3819M5-L-3-3/TR?
By GitHub stars, V4.0 by tomojitakasu, with 526 stars.
Can I simulate one of these boards using the SPX3819M5-L-3-3/TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.