4 open source boards using the 1uF
Real designs built with the 1uF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
CBC
Arrow-air
178 × 211 mm301 parts6LCERN-OHL-S-2.0175ESP32
MotoLoRaXWaffles
Bastiti
81.2 × 53.5 mm43 parts2LNo license0Envelope follower
OSHE-Github
67.8 × 82.7 mm93 parts4LNo license1Position controller
losonczylab
80 × 100 mm67 parts2LGPL-3.01
The 1uF in open source designs
The gallery holds 4 open source boards using the 1uF from 4 GitHub repositories; a typical one measures about 80.6 × 91.3 mm and carries around 80 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is CBC PCB by Arrow-air.
Parts used alongside the 1uF
Microcontrollers on boards using the 1uF
What boards using the 1uF are built for
1uF: common questions
Where can I find a 1uF reference design?
Each of the 4 boards on this page is a real design using the 1uF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 1uF use?
Most are built on ESP32 (2).
How big is a typical board using the 1uF?
The median is 80.6 × 91.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the 1uF?
By GitHub stars, CBC PCB by Arrow-air, with 175 stars.
Can I simulate one of these boards using the 1uF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.