5 open source boards using the 24LC08
Real designs built with the 24LC08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
CM4ClusterHat
will127534
87.3 × 56.7 mm240 parts4LMIT95ESP32
Womo
muccc
254.9 × 150.1 mm532 parts4LGPL-3.084STM32
Aa daughterboard lvds
jlunder
175.3 × 96.5 mm126 parts4LNo license0STM32
Benchy2 Motherboard
Daxxn
159.5 × 105 mm951 parts8LAGPL-3.02Td rgbinput lm1205
tdaede
100 × 50 mm72 parts2LNo license370
How designs wire the 24LC08
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 24LC08 connects to, and the resistors, capacitors and other passives placed on it.
- The A0 pin is tied to GND on 4 of 5 designs.
- The A1 pin is tied to GND on 4 of 5 designs.
- The A2 pin is tied to GND on 4 of 5 designs.
- The VCC pin has a capacitor to GND on 3 of 4 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0pin 1 | Connected to: GND 80% · a signal 20% | — |
| A1pin 2 | Connected to: GND 80% · VCC 20% | — |
| A2pin 3 | Connected to: GND 80% · a signal 20% | — |
| GNDpin 4 | Connected to: GND 100% | — |
| SDApin 5 | Connected to: A connector 40% |
|
| SCLpin 6 | Connected to: A connector 40% |
|
| VCCpin 8 | Connected to: A connector 50% · 3.3V 25% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Td rgbinput lm1205 by tdaede, CM4ClusterHat by will127534, Womo by muccc and Benchy2 Motherboard by Daxxn.
The 24LC08 in open source designs
The gallery holds 5 open source boards using the 24LC08 from 5 GitHub repositories; a typical one measures about 159.5 × 96.5 mm and carries around 240 components.
80% use four copper layers or more, and 60% carry an open source license.
The most starred is Td rgbinput lm1205 by tdaede.
Microcontrollers on boards using the 24LC08
What boards using the 24LC08 are built for
24LC08: common questions
Where can I find a 24LC08 reference design?
Each of the 5 boards on this page is a real design using the 24LC08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 24LC08 A0 pin connected?
The A0 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 24LC08.
How is the 24LC08 A1 pin connected?
The A1 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 24LC08.
How is the 24LC08 A2 pin connected?
The A2 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 24LC08.
Which microcontrollers do boards using the 24LC08 use?
Most are built on STM32 (2), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the 24LC08?
The median is 159.5 × 96.5 mm, and 20% are two-layer designs.
What is the most popular open source board using the 24LC08?
By GitHub stars, Td rgbinput lm1205 by tdaede, with 370 stars.
Can I simulate one of these boards using the 24LC08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.