6 open source boards using the 296-29865-1
Real designs built with the 296-29865-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Maxwell main
azonenberg
280 × 195 mm987 parts8LBSD-3-Clause193
FPGAHost x1
91 × 83 mm243 parts4LBSD-3-Clause193
STM32Entry afe characterization
75 × 77 mm226 parts4LBSD-3-Clause193
STM32La pod
75 × 71 mm210 parts4LBSD-3-Clause193
Iob characterization v02
74.5 × 31 mm123 parts4LBSD-3-Clause193
PICDiffprobe calibrated prototype
48 × 67.5 mm104 parts4LBSD-3-Clause193
The 296-29865-1 in open source designs
The gallery holds 6 open source boards using the 296-29865-1 from 1 GitHub repository; a typical one measures about 75 × 74 mm and carries around 218 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Maxwell main by azonenberg.
What boards using the 296-29865-1 are built for
296-29865-1: common questions
Where can I find a 296-29865-1 reference design?
Each of the 6 boards on this page is a real design using the 296-29865-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 296-29865-1 use?
Most are built on STM32 (3), PIC (1) and FPGA (1).
How big is a typical board using the 296-29865-1?
The median is 75 × 74 mm, and 0% are two-layer designs.
What is the most popular open source board using the 296-29865-1?
By GitHub stars, Maxwell main by azonenberg, with 193 stars.
Can I simulate one of these boards using the 296-29865-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.