5 open source boards using the 74AC32

Real designs built with the 74AC32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The 74AC32 in open source designs

The gallery holds 5 open source boards using the 74AC32 from 2 GitHub repositories; a typical one measures about 131.9 × 164.6 mm and carries around 195 components.

60% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Mainboard by c0pperdragon.

Parts used alongside the 74AC32

What boards using the 74AC32 are built for

74AC32: common questions

Where can I find a 74AC32 reference design?

Each of the 5 boards on this page is a real design using the 74AC32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the 74AC32?

The median is 131.9 × 164.6 mm, and 60% are two-layer designs.

What is the most popular open source board using the 74AC32?

By GitHub stars, Mainboard by c0pperdragon, with 20 stars.

Can I simulate one of these boards using the 74AC32 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part