2 open source boards using the 9_R_01x10
Real designs built with the 9_R_01x10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoEVOLVER Temperature Calibration Module
FYNCH-BIO
92.7 × 82.6 mm28 parts2LNo license11
AVR/ArduinoEVOLVER Temperature Calibration Module
92.7 × 82.6 mm28 parts2LNo license11
The 9_R_01x10 in open source designs
The gallery holds 2 open source boards using the 9_R_01x10 from 1 GitHub repository; a typical one measures about 92.7 × 82.6 mm and carries around 28 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is EVOLVER Temperature Calibration Module by FYNCH-BIO.
Microcontrollers on boards using the 9_R_01x10
What boards using the 9_R_01x10 are built for
9_R_01x10: common questions
Where can I find a 9_R_01x10 reference design?
Each of the 2 boards on this page is a real design using the 9_R_01x10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 9_R_01x10 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 9_R_01x10?
The median is 92.7 × 82.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the 9_R_01x10?
By GitHub stars, EVOLVER Temperature Calibration Module by FYNCH-BIO, with 11 stars.
Can I simulate one of these boards using the 9_R_01x10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.