3 open source boards using the ACS712-30A

Real designs built with the ACS712-30A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The ACS712-30A in open source designs

The gallery holds 3 open source boards using the ACS712-30A from 2 GitHub repositories; a typical one measures about 89 × 113.2 mm and carries around 77 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is PCB board by steger123.

Microcontrollers on boards using the ACS712-30A

What boards using the ACS712-30A are built for

ACS712-30A: common questions

Where can I find a ACS712-30A reference design?

Each of the 3 boards on this page is a real design using the ACS712-30A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ACS712-30A use?

Most are built on ESP32 (2).

How big is a typical board using the ACS712-30A?

The median is 89 × 113.2 mm, and 100% are two-layer designs.

What is the most popular open source board using the ACS712-30A?

By GitHub stars, PCB board by steger123, with 11 stars.

Can I simulate one of these boards using the ACS712-30A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part