2 open source boards using the ADC122S021CIMM
Real designs built with the ADC122S021CIMM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Atinverter
bcarrillo1051
83.8 × 94.6 mm115 parts2LMIT0RP2040/RP2350
Mega
1vers1on
49.3 × 51.8 mm49 parts4LNo license0
The ADC122S021CIMM in open source designs
The gallery holds 2 open source boards using the ADC122S021CIMM from 2 GitHub repositories; a typical one measures about 66.5 × 73.2 mm and carries around 82 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Atinverter by bcarrillo1051.
Microcontrollers on boards using the ADC122S021CIMM
What boards using the ADC122S021CIMM are built for
ADC122S021CIMM: common questions
Where can I find a ADC122S021CIMM reference design?
Each of the 2 boards on this page is a real design using the ADC122S021CIMM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ADC122S021CIMM use?
Most are built on AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the ADC122S021CIMM?
The median is 66.5 × 73.2 mm, and 50% are two-layer designs.
What is the most popular open source board using the ADC122S021CIMM?
By GitHub stars, Atinverter by bcarrillo1051, with 0 stars.
Can I simulate one of these boards using the ADC122S021CIMM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.