2 open source boards using the ADC128S102
Real designs built with the ADC128S102, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Pedals
janc18
86 × 62 mm116 parts4LGPL-3.010
STM32SDM-24 Data Logger
sundevilmotorsports
101 × 75 mm110 parts4LNo license2
The ADC128S102 in open source designs
The gallery holds 2 open source boards using the ADC128S102 from 2 GitHub repositories; a typical one measures about 93.5 × 68.5 mm and carries around 113 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Pedals by janc18.
Microcontrollers on boards using the ADC128S102
ADC128S102: common questions
Where can I find a ADC128S102 reference design?
Each of the 2 boards on this page is a real design using the ADC128S102. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ADC128S102 use?
Most are built on STM32 (2).
How big is a typical board using the ADC128S102?
The median is 93.5 × 68.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the ADC128S102?
By GitHub stars, Pedals by janc18, with 10 stars.
Can I simulate one of these boards using the ADC128S102 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.