6 open source boards using the ADM2582E
Real designs built with the ADM2582E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Tangenta
vmetodiev
243.8 × 243.8 mm534 parts4LCERN-OHL-P-2.05AVR/Arduino
SatelliteController2.0
tokai-student-rocket-project
150 × 100 mm221 parts2LMIT2STM32
Universal interface adapter
411568
175 × 110 mm270 parts4LNo license0ESP32
TrabajoFinal MIoT
m-scasserra
102.6 × 148 mm232 parts4LNo license0Kicad pmod rs485
s59mz
20.3 × 49.3 mm31 parts2LGPL-3.00AVR/Arduino
LaunchController2.0
tokai-student-rocket-project
150 × 100 mm180 parts2LMIT2
How designs wire the ADM2582E
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ADM2582E connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The A pin has a series resistor on 3 of 4 designs, most often 120 Ω (then 10 Ω).
- The VISOIN pin has a capacitor to GND on 3 of 4 designs, most often 100 nF (then 10 nF).
- The RE pin has a pull-up to 5V on 2 of 5 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND1pin 1, 3, 9, 10 | Connected to: GND 100% | — |
| VCCpin 2, 8 | Connected to: 3.3V 80% |
|
| REpin 5 | Connected to: The microcontroller 40% |
|
| DEpin 6 | Connected to: The microcontroller 40% |
|
| GND2pin 11, 14, 16, 20 | Connected to: GND 63% · a signal 38% |
|
| VISOOUTpin 12 | Connected to: Signal 100% |
|
| Ypin 13 | Connected to: A connector 75% |
|
| Bpin 17 | Connected to: A connector 75% |
|
| Apin 18 | Connected to: A connector 75% |
|
| VISOINpin 19 | Connected to: Signal 75% · 3.3V 25% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tangenta by vmetodiev, LaunchController2.0 by tokai-student-rocket-project, Universal interface adapter by 411568 and TrabajoFinal MIoT by m-scasserra.
The ADM2582E in open source designs
The gallery holds 6 open source boards using the ADM2582E from 5 GitHub repositories; a typical one measures about 150 × 105 mm and carries around 227 components.
50% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Tangenta by vmetodiev.
Parts used alongside the ADM2582E
Microcontrollers on boards using the ADM2582E
What boards using the ADM2582E are built for
ADM2582E: common questions
Where can I find a ADM2582E reference design?
Each of the 6 boards on this page is a real design using the ADM2582E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ADM2582E VCC pin?
The VCC pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the ADM2582E.
What resistor goes on the ADM2582E A pin?
The A pin has a series resistor on 3 of 4 designs, most often 120 Ω (then 10 Ω). Counted from the KiCad layouts of 5 open source designs using the ADM2582E.
How is the ADM2582E VISOIN pin connected?
The VISOIN pin has a capacitor to GND on 3 of 4 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the ADM2582E.
Which microcontrollers do boards using the ADM2582E use?
Most are built on AVR/Arduino (2), ESP32 (1) and STM32 (1).
How big is a typical board using the ADM2582E?
The median is 150 × 105 mm, and 50% are two-layer designs.
What is the most popular open source board using the ADM2582E?
By GitHub stars, Tangenta by vmetodiev, with 5 stars.
Can I simulate one of these boards using the ADM2582E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.