5 open source boards using the ADUM1401XRW
Real designs built with the ADUM1401XRW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
TrabajoFinal MIoT
m-scasserra
102.6 × 148 mm232 parts4LNo license0AVR/Arduino
Oscino
cristianfurtuna
120 × 80 mm119 parts4LMIT0Pulse Gen daughter
rafal-zasada
72.3 × 104.7 mm97 parts4LNo license0VOLTN SOLEX
sebritt
190 × 40 mm85 parts2LNo license0Digital isolator-6t2r
mtguerreiro
47.1 × 42 mm32 parts2LBSD-3-Clause0
How designs wire the ADUM1401XRW
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ADUM1401XRW connects to, and the resistors, capacitors and other passives placed on it.
- The VDD1 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF).
- The VDD2 pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF).
- The VE1 pin has a pull-up to 3.3V on 2 of 5 designs, most often 10 kΩ (then 100 kΩ).
- The GND2 pins have a series capacitor on 2 of 5 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD1pin 1 | Connected to: 5V 100% |
|
| GND1pin 2, 8 | Connected to: GND 100% | — |
| VE1pin 7 | Connected to: Signal 60% · 5V 40% |
|
| GND2pin 9, 15 | Connected to: GND 60% · a signal 40% |
|
| VE2pin 10 | Connected to: Signal 80% · 5V 20% |
|
| VOCpin 12 | Connected to: Signal 100% |
|
| VOBpin 13 | Connected to: Signal 100% |
|
| VOApin 14 | Connected to: Signal 100% |
|
| VDD2pin 16 | Connected to: 5V 60% · a signal 40% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Oscino by cristianfurtuna, TrabajoFinal MIoT by m-scasserra, Digital isolator-6t2r by mtguerreiro and Pulse Gen daughter PCB by rafal-zasada.
The ADUM1401XRW in open source designs
The gallery holds 5 open source boards using the ADUM1401XRW from 5 GitHub repositories; a typical one measures about 102.6 × 80 mm and carries around 97 components.
60% use four copper layers or more, and 40% carry an open source license.
The most starred is TrabajoFinal MIoT by m-scasserra.
Microcontrollers on boards using the ADUM1401XRW
What boards using the ADUM1401XRW are built for
ADUM1401XRW: common questions
Where can I find a ADUM1401XRW reference design?
Each of the 5 boards on this page is a real design using the ADUM1401XRW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ADUM1401XRW VDD1 pin?
The VDD1 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the ADUM1401XRW.
What decoupling capacitors do designs use on the ADUM1401XRW VDD2 pin?
The VDD2 pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the ADUM1401XRW.
What pull-up resistor is used on the ADUM1401XRW VE1 pin?
The VE1 pin has a pull-up to 3.3V on 2 of 5 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 5 open source designs using the ADUM1401XRW.
Which microcontrollers do boards using the ADUM1401XRW use?
Most are built on AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the ADUM1401XRW?
The median is 102.6 × 80 mm, and 40% are two-layer designs.
What is the most popular open source board using the ADUM1401XRW?
By GitHub stars, TrabajoFinal MIoT by m-scasserra, with 0 stars.
Can I simulate one of these boards using the ADUM1401XRW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.