2 open source boards using the ADUM5010ARSZ-RL7

Real designs built with the ADUM5010ARSZ-RL7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ADUM5010ARSZ-RL7 in open source designs

The gallery holds 2 open source boards using the ADUM5010ARSZ-RL7 from 2 GitHub repositories; a typical one measures about 98.5 × 84.2 mm and carries around 93 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is UnfolderBuffer 1-21-20 by kefernandez.

Microcontrollers on boards using the ADUM5010ARSZ-RL7

What boards using the ADUM5010ARSZ-RL7 are built for

ADUM5010ARSZ-RL7: common questions

Where can I find a ADUM5010ARSZ-RL7 reference design?

Each of the 2 boards on this page is a real design using the ADUM5010ARSZ-RL7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ADUM5010ARSZ-RL7 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the ADUM5010ARSZ-RL7?

The median is 98.5 × 84.2 mm, and 50% are two-layer designs.

What is the most popular open source board using the ADUM5010ARSZ-RL7?

By GitHub stars, UnfolderBuffer 1-21-20 by kefernandez, with 1 stars.

Can I simulate one of these boards using the ADUM5010ARSZ-RL7 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part