3 open source boards using the AM26LV32
Real designs built with the AM26LV32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Bldc control ver3
pekkaroi
98 × 38 mm61 parts2LGPL-2.0199- schematic only · 21 parts
ClassicII
btb
21 partsNo license15 SA4000
cm68
170 × 110 mm59 parts2LCERN-OHL-P-2.00
The AM26LV32 in open source designs
The gallery holds 3 open source boards using the AM26LV32 from 3 GitHub repositories; a typical one measures about 134 × 74 mm and carries around 59 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Bldc control ver3 by pekkaroi.
Microcontrollers on boards using the AM26LV32
What boards using the AM26LV32 are built for
AM26LV32: common questions
Where can I find a AM26LV32 reference design?
Each of the 3 boards on this page is a real design using the AM26LV32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AM26LV32 use?
Most are built on STM32 (1).
How big is a typical board using the AM26LV32?
The median is 134 × 74 mm, and 100% are two-layer designs.
What is the most popular open source board using the AM26LV32?
By GitHub stars, Bldc control ver3 by pekkaroi, with 199 stars.
Can I simulate one of these boards using the AM26LV32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.