3 open source boards using the AOZ1353DI-01

Real designs built with the AOZ1353DI-01, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The AOZ1353DI-01 in open source designs

The gallery holds 3 open source boards using the AOZ1353DI-01 from 2 GitHub repositories; a typical one measures about 199.8 × 150 mm and carries around 492 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is Tangenta by vmetodiev.

Microcontrollers on boards using the AOZ1353DI-01

AOZ1353DI-01: common questions

Where can I find a AOZ1353DI-01 reference design?

Each of the 3 boards on this page is a real design using the AOZ1353DI-01. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AOZ1353DI-01 use?

Most are built on STM32 (1).

How big is a typical board using the AOZ1353DI-01?

The median is 199.8 × 150 mm, and 0% are two-layer designs.

What is the most popular open source board using the AOZ1353DI-01?

By GitHub stars, Tangenta by vmetodiev, with 5 stars.

Can I simulate one of these boards using the AOZ1353DI-01 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part