3 open source boards using the AP21510FM-7
Real designs built with the AP21510FM-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAFast open switch r1.0
PCB-Arts
230 × 225 mm909 parts12LNo license14
Zeus le rev-2
lopsided98
76.6 × 26 mm82 parts6LGPL-3.02
Zeus le
50 × 50 mm76 parts6LGPL-3.02
The AP21510FM-7 in open source designs
The gallery holds 3 open source boards using the AP21510FM-7 from 2 GitHub repositories; a typical one measures about 76.6 × 50 mm and carries around 82 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Fast open switch r1.0 by PCB-Arts.
Microcontrollers on boards using the AP21510FM-7
What boards using the AP21510FM-7 are built for
AP21510FM-7: common questions
Where can I find a AP21510FM-7 reference design?
Each of the 3 boards on this page is a real design using the AP21510FM-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP21510FM-7 use?
Most are built on FPGA (1).
How big is a typical board using the AP21510FM-7?
The median is 76.6 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP21510FM-7?
By GitHub stars, Fast open switch r1.0 by PCB-Arts, with 14 stars.
Can I simulate one of these boards using the AP21510FM-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.