2 open source boards using the B0505S

Real designs built with the B0505S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The B0505S in open source designs

The gallery holds 2 open source boards using the B0505S from 2 GitHub repositories; a typical one measures about 92.8 × 50.4 mm and carries around 38 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is FluCom by novintic.

Microcontrollers on boards using the B0505S

What boards using the B0505S are built for

B0505S: common questions

Where can I find a B0505S reference design?

Each of the 2 boards on this page is a real design using the B0505S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the B0505S use?

Most are built on ESP8266 (1) and Raspberry Pi (1).

How big is a typical board using the B0505S?

The median is 92.8 × 50.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the B0505S?

By GitHub stars, FluCom by novintic, with 27 stars.

Can I simulate one of these boards using the B0505S before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part