2 open source boards using the BALUN
Real designs built with the BALUN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Ourglass
photomattmills
35.1 × 14 mm43 parts4LMIT5STM32
Roboy crazyfly
Roboy
80.2 × 80.2 mm108 parts4LBSD-3-Clause2
The BALUN in open source designs
The gallery holds 2 open source boards using the BALUN from 2 GitHub repositories; a typical one measures about 57.6 × 47.1 mm and carries around 76 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Ourglass by photomattmills.
Parts used alongside the BALUN
Microcontrollers on boards using the BALUN
What boards using the BALUN are built for
BALUN: common questions
Where can I find a BALUN reference design?
Each of the 2 boards on this page is a real design using the BALUN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the BALUN use?
Most are built on Nordic nRF (1) and STM32 (1).
How big is a typical board using the BALUN?
The median is 57.6 × 47.1 mm, and 0% are two-layer designs.
What is the most popular open source board using the BALUN?
By GitHub stars, Ourglass by photomattmills, with 5 stars.
Can I simulate one of these boards using the BALUN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.