2 open source boards using the CRE1S0505S3C

Real designs built with the CRE1S0505S3C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The CRE1S0505S3C in open source designs

The gallery holds 2 open source boards using the CRE1S0505S3C from 2 GitHub repositories; a typical one measures about 112.7 × 69.5 mm and carries around 133 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Rapid-CoreX by Arockiyalipson.

Microcontrollers on boards using the CRE1S0505S3C

What boards using the CRE1S0505S3C are built for

CRE1S0505S3C: common questions

Where can I find a CRE1S0505S3C reference design?

Each of the 2 boards on this page is a real design using the CRE1S0505S3C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the CRE1S0505S3C use?

Most are built on STM32 (1).

How big is a typical board using the CRE1S0505S3C?

The median is 112.7 × 69.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the CRE1S0505S3C?

By GitHub stars, Rapid-CoreX by Arockiyalipson, with 0 stars.

Can I simulate one of these boards using the CRE1S0505S3C before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part