2 open source boards using the D3V3F4U10LP-7
Real designs built with the D3V3F4U10LP-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
CM4ClusterHat
will127534
87.3 × 56.7 mm240 parts4LMIT95STM32
Base Board Design
WilliamSanchez
199.8 × 150 mm492 parts4LNo license2
The D3V3F4U10LP-7 in open source designs
The gallery holds 2 open source boards using the D3V3F4U10LP-7 from 2 GitHub repositories; a typical one measures about 143.6 × 103.3 mm and carries around 366 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is CM4ClusterHat by will127534.
Microcontrollers on boards using the D3V3F4U10LP-7
D3V3F4U10LP-7: common questions
Where can I find a D3V3F4U10LP-7 reference design?
Each of the 2 boards on this page is a real design using the D3V3F4U10LP-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the D3V3F4U10LP-7 use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the D3V3F4U10LP-7?
The median is 143.6 × 103.3 mm, and 0% are two-layer designs.
What is the most popular open source board using the D3V3F4U10LP-7?
By GitHub stars, CM4ClusterHat by will127534, with 95 stars.
Can I simulate one of these boards using the D3V3F4U10LP-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.