2 open source boards using the DG409DY-T1-E3
Real designs built with the DG409DY-T1-E3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
minisystem
The DG409DY-T1-E3 in open source designs
The gallery holds 2 open source boards using the DG409DY-T1-E3 from 2 GitHub repositories; a typical one measures about 65 × 103.3 mm and carries around 196 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is JOVE by minisystem.
Parts used alongside the DG409DY-T1-E3
What boards using the DG409DY-T1-E3 are built for
DG409DY-T1-E3: common questions
Where can I find a DG409DY-T1-E3 reference design?
Each of the 2 boards on this page is a real design using the DG409DY-T1-E3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the DG409DY-T1-E3?
The CD40106BPWR, CD4027BPWR, TL072CPWR and TS321ILT appear in the most repositories here.
How big is a typical board using the DG409DY-T1-E3?
The median is 65 × 103.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the DG409DY-T1-E3?
By GitHub stars, JOVE by minisystem, with 109 stars.
Can I simulate one of these boards using the DG409DY-T1-E3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.