2 open source boards using the DG419DY-T1-E3

Real designs built with the DG419DY-T1-E3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The DG419DY-T1-E3 in open source designs

The gallery holds 2 open source boards using the DG419DY-T1-E3 from 2 GitHub repositories; a typical one measures about 140 × 78 mm and carries around 201 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is TIGP class board 2026 - main board by TIGP-Experimental-Methods.

What boards using the DG419DY-T1-E3 are built for

DG419DY-T1-E3: common questions

Where can I find a DG419DY-T1-E3 reference design?

Each of the 2 boards on this page is a real design using the DG419DY-T1-E3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the DG419DY-T1-E3?

The median is 140 × 78 mm, and 0% are two-layer designs.

What is the most popular open source board using the DG419DY-T1-E3?

By GitHub stars, TIGP class board 2026 - main board by TIGP-Experimental-Methods, with 0 stars.

Can I simulate one of these boards using the DG419DY-T1-E3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part