2 open source boards using the DS28E07
Real designs built with the DS28E07, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Blade13
opulo-inc
203 × 26.6 mm42 parts2LCC-BY-SA-4.03.7k
Blade12
187.2 × 26.6 mm38 parts2LCC-BY-SA-4.03.7k
The DS28E07 in open source designs
The gallery holds 2 open source boards using the DS28E07 from 1 GitHub repository; a typical one measures about 195.1 × 26.6 mm and carries around 40 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Blade13 by opulo-inc.
DS28E07: common questions
Where can I find a DS28E07 reference design?
Each of the 2 boards on this page is a real design using the DS28E07. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the DS28E07?
The median is 195.1 × 26.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the DS28E07?
By GitHub stars, Blade13 by opulo-inc, with 3,655 stars.
Can I simulate one of these boards using the DS28E07 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.