3 open source boards using the EC11E18244A5

Real designs built with the EC11E18244A5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The EC11E18244A5 in open source designs

The gallery holds 3 open source boards using the EC11E18244A5 from 3 GitHub repositories; a typical one measures about 148.1 × 42.1 mm and carries around 46 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Mt32-pi bay by wiretap-retro.

Microcontrollers on boards using the EC11E18244A5

What boards using the EC11E18244A5 are built for

EC11E18244A5: common questions

Where can I find a EC11E18244A5 reference design?

Each of the 3 boards on this page is a real design using the EC11E18244A5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the EC11E18244A5 use?

Most are built on AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the EC11E18244A5?

The median is 148.1 × 42.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the EC11E18244A5?

By GitHub stars, Mt32-pi bay by wiretap-retro, with 8 stars.

Can I simulate one of these boards using the EC11E18244A5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part