6 open source boards using the ESP32-PICO-MINI-02

Real designs built with the ESP32-PICO-MINI-02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the ESP32-PICO-MINI-02

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-PICO-MINI-02 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a pull-up to 3.3V on 4 of 4 designs, most often 10 kΩ.
  • The I37 pin is left unconnected on 4 of 4 designs.
  • The I38 pin is left unconnected on 4 of 4 designs.
  • The I39 pin is left unconnected on 4 of 4 designs.
GNDpin 1, 2, 11, 14, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61Connected to: GND 100%
3V3pin 3Connected to: 3.3V 67% · not connected 33%
I36pin 4Connected to: Not connected 75% · a signal 25%
I37pin 5Connected to: Not connected 100%
I38pin 6Connected to: Not connected 100%
I39pin 7Connected to: Not connected 100%
ENpin 8Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 10 kΩ (4)
  • Capacitor to GND on 75% · 100 nF (1), 10 µF (1), 1 µF (1)
I34pin 9Connected to: Not connected 100%
I35pin 10Connected to: Not connected 75% · a signal 25%
IO32pin 12Connected to: Not connected 75% · a signal 25%
IO33pin 13Connected to: Not connected 75% · a signal 25%
IO25pin 15Connected to: Not connected 75% · a signal 25%
IO26pin 16Connected to: Not connected 50% · a signal 50%
  • Series resistor on 50% · 1 MΩ (1), 470 Ω (1)
IO27pin 17Connected to: Not connected 50% · a signal 50%
  • Series resistor on 50% · 600 Ω (1), 470 Ω (1)
IO13pin 20Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 0 Ω (1), 22 Ω (1)
IO15pin 21Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 0 Ω (1), 22 Ω (1)
IO2pin 22Connected to: Not connected 75% · a signal 25%
IO4pin 24Connected to: Not connected 75% · a signal 25%
NCpin 25, 32Connected to: Not connected 100%
IO20pin 26Connected to: Signal 75% · not connected 25%
  • Pull-up to 3.3V on 50% · 1 kΩ (1), 3.3 kΩ (1)
IO7pin 27Connected to: Not connected 100%
IO8pin 28Connected to: Not connected 100%
IO5pin 29Connected to: Not connected 75% · a signal 25%

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Doorman slot by AzonInc, Wireless Communication Board-WCB by greghulette, Procon gcc main pcb by HandHeldLegend and HolidayExpress by joshkephart.

The ESP32-PICO-MINI-02 in open source designs

The gallery holds 6 open source boards using the ESP32-PICO-MINI-02 from 5 GitHub repositories; a typical one measures about 55.8 × 54.9 mm and carries around 60 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Doorman slot by AzonInc.

Microcontrollers on boards using the ESP32-PICO-MINI-02

What boards using the ESP32-PICO-MINI-02 are built for

ESP32-PICO-MINI-02: common questions

Where can I find a ESP32-PICO-MINI-02 reference design?

Each of the 6 boards on this page is a real design using the ESP32-PICO-MINI-02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ESP32-PICO-MINI-02 EN pin?

The EN pin has a pull-up to 3.3V on 4 of 4 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the ESP32-PICO-MINI-02.

How is the ESP32-PICO-MINI-02 I37 pin connected?

The I37 pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-PICO-MINI-02.

How is the ESP32-PICO-MINI-02 I38 pin connected?

The I38 pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-PICO-MINI-02.

Which microcontrollers do boards using the ESP32-PICO-MINI-02 use?

Most are built on RP2040/RP2350 (6).

How big is a typical board using the ESP32-PICO-MINI-02?

The median is 55.8 × 54.9 mm, and 33% are two-layer designs.

What is the most popular open source board using the ESP32-PICO-MINI-02?

By GitHub stars, Doorman slot by AzonInc, with 241 stars.

Can I simulate one of these boards using the ESP32-PICO-MINI-02 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part