8 open source boards using the ESP32-S2-MINI-2

Real designs built with the ESP32-S2-MINI-2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the ESP32-S2-MINI-2

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-S2-MINI-2 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a pull-up to 3.3V on 4 of 4 designs, most often 10 kΩ (then 5.1 kΩ).
  • The 3V3 pin is tied to 3.3V on 4 of 5 designs.
  • The IO46 pin is left unconnected on 4 of 4 designs.
  • The IO10 pin has a series resistor on 3 of 4 designs, most often 510 Ω (then 22 kΩ).
GNDpin 1, 2, 30, 42, 43, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65Connected to: GND 98%
3V3pin 3Connected to: 3.3V 80% · a signal 20%
IO0pin 4Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 40% · 100 nF (1), 1 µF (1)
  • Pull-up to 3.3V on 40% · 5.1 kΩ (1), 22 kΩ (1)
IO4pin 8Connected to: Signal 100%
  • Series resistor on 50% · 510 Ω (1), 1 kΩ (1)
IO6pin 10Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 510 Ω (1), 27 Ω (1)
IO10pin 14Connected to: Signal 100%
  • Series resistor on 75% · 510 Ω (1), 22 kΩ (1)
  • Resistor to GND on 50% · 470 kΩ (1), 5.1 kΩ (1)
IO11pin 15Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 510 Ω (1)
IO18pin 22Connected to: Not connected 75% · a signal 25%
NCpin 27Connected to: Not connected 100%
IO37pin 33Connected to: Not connected 75% · a signal 25%
IO42pin 38Connected to: Not connected 75% · a signal 25%
IO45pin 41Connected to: Not connected 75% · a signal 25%
IO46pin 44Connected to: Not connected 100%
ENpin 45Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 10 kΩ (2), 5.1 kΩ (1), 22 kΩ (1)
  • Capacitor to GND on 75% · 100 nF (3), 1 µF (1)

27 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Control board by Potato-eater, Panel by mikesmitty, Synthesizer by 0ll0wain and Sigma Spaceship - second try by Napkin-to-Billboard.

The ESP32-S2-MINI-2 in open source designs

The gallery holds 8 open source boards using the ESP32-S2-MINI-2 from 5 GitHub repositories; a typical one measures about 106.8 × 77.8 mm and carries around 56 components.

50% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is Control board by Potato-eater.

Parts used alongside the ESP32-S2-MINI-2

Microcontrollers on boards using the ESP32-S2-MINI-2

What boards using the ESP32-S2-MINI-2 are built for

ESP32-S2-MINI-2: common questions

Where can I find a ESP32-S2-MINI-2 reference design?

Each of the 8 boards on this page is a real design using the ESP32-S2-MINI-2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ESP32-S2-MINI-2 EN pin?

The EN pin has a pull-up to 3.3V on 4 of 4 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 5 open source designs using the ESP32-S2-MINI-2.

How is the ESP32-S2-MINI-2 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-S2-MINI-2.

How is the ESP32-S2-MINI-2 IO46 pin connected?

The IO46 pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-S2-MINI-2.

Which microcontrollers do boards using the ESP32-S2-MINI-2 use?

Most are built on ESP32 (5) and RP2040/RP2350 (3).

How big is a typical board using the ESP32-S2-MINI-2?

The median is 106.8 × 77.8 mm, and 50% are two-layer designs.

What is the most popular open source board using the ESP32-S2-MINI-2?

By GitHub stars, Control board by Potato-eater, with 2 stars.

Can I simulate one of these boards using the ESP32-S2-MINI-2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part