1 open source board using the ESP32-S3-DEVKITC-1_DAVID
Real designs built with the ESP32-S3-DEVKITC-1_DAVID, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PockyBum522The ESP32-S3-DEVKITC-1_DAVID in open source designs
The gallery holds 1 open source boards using the ESP32-S3-DEVKITC-1_DAVID from 1 GitHub repository; a typical one measures about 50.8 × 98.3 mm and carries around 11 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Car NFC Main Board by PockyBum522.
Microcontrollers on boards using the ESP32-S3-DEVKITC-1_DAVID
ESP32-S3-DEVKITC-1_DAVID: common questions
Where can I find a ESP32-S3-DEVKITC-1_DAVID reference design?
Each of the 1 boards on this page is a real design using the ESP32-S3-DEVKITC-1_DAVID. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ESP32-S3-DEVKITC-1_DAVID use?
Most are built on ESP32 (1).
How big is a typical board using the ESP32-S3-DEVKITC-1_DAVID?
The median is 50.8 × 98.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP32-S3-DEVKITC-1_DAVID?
By GitHub stars, Car NFC Main Board by PockyBum522, with 2 stars.
Can I simulate one of these boards using the ESP32-S3-DEVKITC-1_DAVID before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.