2 open source boards using the ETA7014S2G

Real designs built with the ETA7014S2G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ETA7014S2G in open source designs

The gallery holds 2 open source boards using the ETA7014S2G from 2 GitHub repositories; a typical one measures about 64.5 × 60 mm and carries around 119 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Benchswitch usb dut hub by saikhamhein.

Microcontrollers on boards using the ETA7014S2G

What boards using the ETA7014S2G are built for

ETA7014S2G: common questions

Where can I find a ETA7014S2G reference design?

Each of the 2 boards on this page is a real design using the ETA7014S2G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ETA7014S2G use?

Most are built on ESP32 (1).

How big is a typical board using the ETA7014S2G?

The median is 64.5 × 60 mm, and 50% are two-layer designs.

What is the most popular open source board using the ETA7014S2G?

By GitHub stars, Benchswitch usb dut hub by saikhamhein, with 0 stars.

Can I simulate one of these boards using the ETA7014S2G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part