1 open source board using the FE1.1s_USB2.0-HUB
Real designs built with the FE1.1s_USB2.0-HUB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OLIMEXThe FE1.1s_USB2.0-HUB in open source designs
The gallery holds 1 open source boards using the FE1.1s_USB2.0-HUB from 1 GitHub repository; a typical one measures about 80 × 65 mm and carries around 159 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is RP2040pc by OLIMEX.
Microcontrollers on boards using the FE1.1s_USB2.0-HUB
What boards using the FE1.1s_USB2.0-HUB are built for
FE1.1s_USB2.0-HUB: common questions
Where can I find a FE1.1s_USB2.0-HUB reference design?
Each of the 1 boards on this page is a real design using the FE1.1s_USB2.0-HUB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the FE1.1s_USB2.0-HUB use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the FE1.1s_USB2.0-HUB?
The median is 80 × 65 mm, and 0% are two-layer designs.
What is the most popular open source board using the FE1.1s_USB2.0-HUB?
By GitHub stars, RP2040pc by OLIMEX, with 11 stars.
Can I simulate one of these boards using the FE1.1s_USB2.0-HUB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.