3 open source boards using the HAL4395SO5

Real designs built with the HAL4395SO5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The HAL4395SO5 in open source designs

The gallery holds 3 open source boards using the HAL4395SO5 from 2 GitHub repositories; a typical one measures about 74.6 × 36.5 mm and carries around 10 components.

67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is FPC Trigger Board by HandHeldLegend.

Microcontrollers on boards using the HAL4395SO5

HAL4395SO5: common questions

Where can I find a HAL4395SO5 reference design?

Each of the 3 boards on this page is a real design using the HAL4395SO5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the HAL4395SO5 use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the HAL4395SO5?

The median is 74.6 × 36.5 mm, and 67% are two-layer designs.

What is the most popular open source board using the HAL4395SO5?

By GitHub stars, FPC Trigger Board by HandHeldLegend, with 61 stars.

Can I simulate one of these boards using the HAL4395SO5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part