5 open source boards using the INA180A4
Real designs built with the INA180A4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0991- schematic only · 78 parts
Autonomous-Solar-Light
nguyenduc-03
78 partsNo license1 RP2040/RP2350
Ichnaea
brandonbraun653
100 × 100 mm340 parts4LMIT0STM32
Ghoul
tzarc
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0991STM32
Kobold
tzarc
76 × 75.1 mm94 parts4LCERN-OHL-S-2.0991
The INA180A4 in open source designs
The gallery holds 5 open source boards using the INA180A4 from 3 GitHub repositories; a typical one measures about 146.2 × 89.7 mm and carries around 163 components.
50% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Djinn by tzarc.
Microcontrollers on boards using the INA180A4
What boards using the INA180A4 are built for
INA180A4: common questions
Where can I find a INA180A4 reference design?
Each of the 5 boards on this page is a real design using the INA180A4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA180A4 use?
Most are built on STM32 (3) and RP2040/RP2350 (1).
How big is a typical board using the INA180A4?
The median is 146.2 × 89.7 mm, and 50% are two-layer designs.
What is the most popular open source board using the INA180A4?
By GitHub stars, Djinn by tzarc, with 991 stars.
Can I simulate one of these boards using the INA180A4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.