3 open source boards using the INA240A1PWR
Real designs built with the INA240A1PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
UVerter
owntech-foundation
178.9 × 131.8 mm317 parts4LCERN-OHL-S-2.0112
HPM5E31 ECatDualFOC
LX050724
85 × 113 mm559 parts4LMIT14
BLDCM Power
brenocq
32 × 32 mm60 parts4LMIT10
The INA240A1PWR in open source designs
The gallery holds 3 open source boards using the INA240A1PWR from 3 GitHub repositories; a typical one measures about 85 × 113 mm and carries around 317 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is UVerter by owntech-foundation.
What boards using the INA240A1PWR are built for
INA240A1PWR: common questions
Where can I find a INA240A1PWR reference design?
Each of the 3 boards on this page is a real design using the INA240A1PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the INA240A1PWR?
The median is 85 × 113 mm, and 0% are two-layer designs.
What is the most popular open source board using the INA240A1PWR?
By GitHub stars, UVerter by owntech-foundation, with 112 stars.
Can I simulate one of these boards using the INA240A1PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.