1 open source board using the LDO1117-33_SOT223
Real designs built with the LDO1117-33_SOT223, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
azonenbergThe LDO1117-33_SOT223 in open source designs
The gallery holds 1 open source boards using the LDO1117-33_SOT223 from 1 GitHub repository; a typical one measures about 73 × 54 mm and carries around 36 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Pic32mx jtag by azonenberg.
Microcontrollers on boards using the LDO1117-33_SOT223
What boards using the LDO1117-33_SOT223 are built for
LDO1117-33_SOT223: common questions
Where can I find a LDO1117-33_SOT223 reference design?
Each of the 1 boards on this page is a real design using the LDO1117-33_SOT223. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LDO1117-33_SOT223 use?
Most are built on PIC (1).
How big is a typical board using the LDO1117-33_SOT223?
The median is 73 × 54 mm, and 0% are two-layer designs.
What is the most popular open source board using the LDO1117-33_SOT223?
By GitHub stars, Pic32mx jtag by azonenberg, with 17 stars.
Can I simulate one of these boards using the LDO1117-33_SOT223 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.