5 open source boards using the LM2576S-12
Real designs built with the LM2576S-12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
AmplifierBoard
dangrie158
210 × 104 mm225 parts2LMIT0RP2040/RP2350
Iw-8-controller
mekatrol
167.3 × 103 mm198 parts2LNo license0Kicad-Projects
Bakhul123
66 × 47 mm8 parts2LCC0-1.00Power board
LiU-SeeGoals
166 × 166 mm53 parts4LNo license0RP2040/RP2350
Controller
mekatrol
140 × 100 mm146 parts2LNo license0
The LM2576S-12 in open source designs
The gallery holds 5 open source boards using the LM2576S-12 from 4 GitHub repositories; a typical one measures about 166 × 103 mm and carries around 146 components.
80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is AmplifierBoard by dangrie158.
Microcontrollers on boards using the LM2576S-12
What boards using the LM2576S-12 are built for
LM2576S-12: common questions
Where can I find a LM2576S-12 reference design?
Each of the 5 boards on this page is a real design using the LM2576S-12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM2576S-12 use?
Most are built on RP2040/RP2350 (2) and AVR/Arduino (1).
How big is a typical board using the LM2576S-12?
The median is 166 × 103 mm, and 80% are two-layer designs.
What is the most popular open source board using the LM2576S-12?
By GitHub stars, AmplifierBoard by dangrie158, with 0 stars.
Can I simulate one of these boards using the LM2576S-12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.