4 open source boards using the LMR33630
Real designs built with the LMR33630, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mppt-1210-hus
LibreSolar
90 × 85 mm118 partsCERN-OHL-W-2.083Gloworm
Pigmice2733
65 × 56 mm28 parts2LCC-BY-NC-4.08Soldered-Buck converter hardware design
test-gh-syncer2
22 × 54 mm25 parts2LTAPR-OHL-1.00SENTINEL RFSoC Tile Carrier
ajisrawi
240 × 190 mm114 parts4LNo license0
The LMR33630 in open source designs
The gallery holds 4 open source boards using the LMR33630 from 4 GitHub repositories; a typical one measures about 77.5 × 70.5 mm and carries around 71 components.
67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Mppt-1210-hus by LibreSolar.
Microcontrollers on boards using the LMR33630
What boards using the LMR33630 are built for
LMR33630: common questions
Where can I find a LMR33630 reference design?
Each of the 4 boards on this page is a real design using the LMR33630. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LMR33630 use?
Most are built on STM32 (1).
How big is a typical board using the LMR33630?
The median is 77.5 × 70.5 mm, and 67% are two-layer designs.
What is the most popular open source board using the LMR33630?
By GitHub stars, Mppt-1210-hus by LibreSolar, with 83 stars.
Can I simulate one of these boards using the LMR33630 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.