4 open source boards using the LP2950-5.0_TO252
Real designs built with the LP2950-5.0_TO252, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Narcotic VCO
SPCMSK
78 × 128.5 mm95 parts2LNo license0Austral VCO
SPCMSK
56 × 115.1 mm87 parts2LNo license0R8 COP Adapter
Ardamirgr
49.8 × 54 mm16 parts2LApache-2.07AVR/Arduino
Impulsgenerator
apxco
99 × 48.5 mm43 parts2LNo license0
The LP2950-5.0_TO252 in open source designs
The gallery holds 4 open source boards using the LP2950-5.0_TO252 from 3 GitHub repositories; a typical one measures about 67 × 84.6 mm and carries around 65 components.
100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is R8 COP Adapter by Ardamirgr.
Microcontrollers on boards using the LP2950-5.0_TO252
What boards using the LP2950-5.0_TO252 are built for
LP2950-5.0_TO252: common questions
Where can I find a LP2950-5.0_TO252 reference design?
Each of the 4 boards on this page is a real design using the LP2950-5.0_TO252. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LP2950-5.0_TO252 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the LP2950-5.0_TO252?
The median is 67 × 84.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the LP2950-5.0_TO252?
By GitHub stars, R8 COP Adapter by Ardamirgr, with 7 stars.
Can I simulate one of these boards using the LP2950-5.0_TO252 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.