2 open source boards using the LT1762-5
Real designs built with the LT1762-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32ADS1299-BioAmp
wangq22
74.5 × 49 mm76 parts2LNo license1
AVR/ArduinoSpeedometer hardware
gpgreen
70 × 34 mm51 parts4LNo license0
The LT1762-5 in open source designs
The gallery holds 2 open source boards using the LT1762-5 from 2 GitHub repositories; a typical one measures about 72.3 × 41.5 mm and carries around 64 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is ADS1299-BioAmp by wangq22.
Parts used alongside the LT1762-5
Microcontrollers on boards using the LT1762-5
What boards using the LT1762-5 are built for
LT1762-5: common questions
Where can I find a LT1762-5 reference design?
Each of the 2 boards on this page is a real design using the LT1762-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LT1762-5 use?
Most are built on AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the LT1762-5?
The median is 72.3 × 41.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the LT1762-5?
By GitHub stars, ADS1299-BioAmp by wangq22, with 1 stars.
Can I simulate one of these boards using the LT1762-5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.