3 open source boards using the MC7805CDTRKG

Real designs built with the MC7805CDTRKG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The MC7805CDTRKG in open source designs

The gallery holds 3 open source boards using the MC7805CDTRKG from 3 GitHub repositories; a typical one measures about 99.5 × 61.3 mm and carries around 58 components.

50% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Pre Ignition by OpenLogicEFI.

Microcontrollers on boards using the MC7805CDTRKG

MC7805CDTRKG: common questions

Where can I find a MC7805CDTRKG reference design?

Each of the 3 boards on this page is a real design using the MC7805CDTRKG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MC7805CDTRKG use?

Most are built on AVR/Arduino (2).

How big is a typical board using the MC7805CDTRKG?

The median is 99.5 × 61.3 mm, and 50% are two-layer designs.

What is the most popular open source board using the MC7805CDTRKG?

By GitHub stars, Pre Ignition by OpenLogicEFI, with 18 stars.

Can I simulate one of these boards using the MC7805CDTRKG before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part