2 open source boards using the MC79M05_TO252

Real designs built with the MC79M05_TO252, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MC79M05_TO252 in open source designs

The gallery holds 2 open source boards using the MC79M05_TO252 from 2 GitHub repositories; a typical one measures about 162.1 × 77.6 mm and carries around 304 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is C245-JBC-control by radioelf.

Microcontrollers on boards using the MC79M05_TO252

MC79M05_TO252: common questions

Where can I find a MC79M05_TO252 reference design?

Each of the 2 boards on this page is a real design using the MC79M05_TO252. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MC79M05_TO252 use?

Most are built on AVR/Arduino (1) and STM32 (1).

How big is a typical board using the MC79M05_TO252?

The median is 162.1 × 77.6 mm, and 50% are two-layer designs.

What is the most popular open source board using the MC79M05_TO252?

By GitHub stars, C245-JBC-control by radioelf, with 15 stars.

Can I simulate one of these boards using the MC79M05_TO252 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part