3 open source boards using the MCP1700T-3302E

Real designs built with the MCP1700T-3302E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filtersOpen license only|Most starred Recently updated Most components

The MCP1700T-3302E in open source designs

The gallery holds 3 open source boards using the MCP1700T-3302E from 2 GitHub repositories; a typical one measures about 150 × 99.5 mm and carries around 219 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Rnvm bart by jaromir-sukuba.

Microcontrollers on boards using the MCP1700T-3302E

FPGA 1

What boards using the MCP1700T-3302E are built for

MCP1700T-3302E: common questions

Where can I find a MCP1700T-3302E reference design?

Each of the 3 boards on this page is a real design using the MCP1700T-3302E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MCP1700T-3302E use?

Most are built on FPGA (1).

How big is a typical board using the MCP1700T-3302E?

The median is 150 × 99.5 mm, and 33% are two-layer designs.

What is the most popular open source board using the MCP1700T-3302E?

By GitHub stars, Rnvm bart by jaromir-sukuba, with 459 stars.

Can I simulate one of these boards using the MCP1700T-3302E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.