3 open source boards using the MCP2518FDT-E/QBB
Real designs built with the MCP2518FDT-E/QBB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
URC
spikonado
110 × 90 mm150 parts4LCERN-OHL-W-2.02RP2040/RP2350
ThumbMuncher
Alsa2
52 × 51 mm82 parts4LNo license0Canjay
atopile
122 × 100 mm152 parts6LMIT29
The MCP2518FDT-E/QBB in open source designs
The gallery holds 3 open source boards using the MCP2518FDT-E/QBB from 3 GitHub repositories; a typical one measures about 110 × 90 mm and carries around 150 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Canjay by atopile.
Microcontrollers on boards using the MCP2518FDT-E/QBB
What boards using the MCP2518FDT-E/QBB are built for
MCP2518FDT-E/QBB: common questions
Where can I find a MCP2518FDT-E/QBB reference design?
Each of the 3 boards on this page is a real design using the MCP2518FDT-E/QBB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP2518FDT-E/QBB use?
Most are built on ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the MCP2518FDT-E/QBB?
The median is 110 × 90 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP2518FDT-E/QBB?
By GitHub stars, Canjay by atopile, with 29 stars.
Can I simulate one of these boards using the MCP2518FDT-E/QBB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.