6 open source boards using the MCP4922-ESL
Real designs built with the MCP4922-ESL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
OverCycler 3 board
gligli
233.7 × 172.2 mm331 parts2LGPL-3.045ESP32
Galvo
breqdev
200 × 50 mm84 parts2LNo license16RP2040/RP2350
Combo laser driver
adeboni
100 × 100 mm165 parts2LGPL-3.00LaserController
GrussmayerLab
100 × 80 mm44 parts2LNo license00034 DAC Module MCP4922
AirchipTeknoloji
40 × 30 mm14 parts2LNo license0RP2040/RP2350
Canbus adapter
adeboni
100 × 80 mm77 parts2LGPL-3.00
How designs wire the MCP4922-ESL
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP4922-ESL connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
- The LDAC pin is tied to GND on 4 of 5 designs.
- The SHDN pin is tied to 3.3V on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 100% |
|
| NCpin 2, 6, 7 | Connected to: Not connected 100% | — |
| LDACpin 8 | Connected to: GND 80% · a signal 20% | — |
| SHDNpin 9 | Connected to: 3.3V 80% · a signal 20% | — |
| VREFBpin 11 | Connected to: 3.3V 80% · a signal 20% | — |
| AVSSpin 12 | Connected to: GND 100% | — |
| VREFApin 13 | Connected to: 3.3V 80% · a signal 20% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OverCycler 3 board by gligli, Galvo by breqdev, Canbus adapter by adeboni and 0034 DAC Module MCP4922 by AirchipTeknoloji.
The MCP4922-ESL in open source designs
The gallery holds 6 open source boards using the MCP4922-ESL from 5 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 81 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is OverCycler 3 board by gligli.
Microcontrollers on boards using the MCP4922-ESL
What boards using the MCP4922-ESL are built for
MCP4922-ESL: common questions
Where can I find a MCP4922-ESL reference design?
Each of the 6 boards on this page is a real design using the MCP4922-ESL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP4922-ESL VDD pin?
The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the MCP4922-ESL.
How is the MCP4922-ESL LDAC pin connected?
The LDAC pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP4922-ESL.
How is the MCP4922-ESL SHDN pin connected?
The SHDN pin is tied to 3.3V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP4922-ESL.
Which microcontrollers do boards using the MCP4922-ESL use?
Most are built on RP2040/RP2350 (2), ESP32 (1) and NXP (1).
How big is a typical board using the MCP4922-ESL?
The median is 100 × 80 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP4922-ESL?
By GitHub stars, OverCycler 3 board by gligli, with 45 stars.
Can I simulate one of these boards using the MCP4922-ESL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.