3 open source boards using the MCP6001RT-I/OT
Real designs built with the MCP6001RT-I/OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
BladeCore-M54E
DvidMakesThings
29.1 × 80.6 mm148 parts6LAGPL-3.0861 kHz Sallen-Key low pass, single 5 V
sabas0ba
54 × 38 mm22 parts2LApache-2.01STM32
Magnet Module
Mouse-GYM
71 × 89 mm117 parts4LNo license0
The MCP6001RT-I/OT in open source designs
The gallery holds 3 open source boards using the MCP6001RT-I/OT from 3 GitHub repositories; a typical one measures about 54 × 80.6 mm and carries around 117 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is BladeCore-M54E by DvidMakesThings.
Microcontrollers on boards using the MCP6001RT-I/OT
What boards using the MCP6001RT-I/OT are built for
MCP6001RT-I/OT: common questions
Where can I find a MCP6001RT-I/OT reference design?
Each of the 3 boards on this page is a real design using the MCP6001RT-I/OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6001RT-I/OT use?
Most are built on STM32 (1).
How big is a typical board using the MCP6001RT-I/OT?
The median is 54 × 80.6 mm, and 33% are two-layer designs.
What is the most popular open source board using the MCP6001RT-I/OT?
By GitHub stars, BladeCore-M54E by DvidMakesThings, with 86 stars.
Can I simulate one of these boards using the MCP6001RT-I/OT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.